Her finner du en oversikt over sikkerhetskurs for industri og offshore. Se valg i venstremenyen for mer detaljerte kategorier. Her finner du Sikkerhetskurs for kran, truck og anleggsmaskiner.
Alle som skal utføre arbeid på eller ved veg skal minimum ha gjennomgått kurs 1. Med arbeid på veg, menes her alt arbeid som medfører opphold på veg, inklusive inspeksjon, kontroll, befaring m.v. I de fleste tilfeller vil vi anbefale kurs 2.
Alle som skal utføre arbeid på eller ved veg bør ha gjennomgått kurs 2. Kurs 2 gir ansvarsfrihet for ansvarshavende, og alle arbeidere som har sitt arbeid på eller ved veg. Dette kurset anbefales til alle, som da har mulighet for å utføre arbeidet alene.
Vi tilbyr kurs 1 arbeidsvarsling / skilting, for alle som skal utføre arbeid på veg. Alle som utfører arbeid på eller ved veg skal ha nødvendig opplæring i arbeidsvarsling.
Vi tilbyr kurs 3 arbeidsvarsling / skilting, manuell trafikkdirigering med praksis. Alle som utfører arbeid på eller ved veg skal ha nødvendig opplæring i arbeidsvarsling.
Bedriftstilpasset kurs som gjennomføres på oppdragsgivers sted og hvor oppdragsgivers stilas brukes i opplæringen.
Formålet er å gi kursdeltakerne en grunnleggende kunnskap og forståelse for egen og andres sikkerhet: kunnskap om de formelle prosedyrer før arbeidet starter og under arbeidets gang.
Formålet er å gi kursdeltakerne en teoretisk tyngde for å sikre arbeidet i forkant, på en lovlig og hensiktsmessig måte. Det er betryggende for alle enten det gjelder de ansvarlige, ansatte på stedet, eller andre som berøres av arbeid på offentlig grunn.
Vi tilbyr Grunnleggande fallsikringskurs 8 timar.
Formålet med kurset er å heve kompetanen teoretisk og praktisk.
Formålet med kurset er å heve kompetansen teoretisk og praktisk innen:
• Inspeksjons- og observasjonsteknikk
• Barriere forståelse: forståelse av arbeid, sikring og sikkerhet i høyden
• Risiko forståelse: forståelse av sikker arbeidsutførelse og sikring
This CBT covers aspects of an anchor handling operation undertaken by a vessel. Extensive use is made of video, recorded on an anchor handler during an operation to lay out an anchor.
In order to operate the auxiliary boiler plant at a safe and efficient way it is necessary to properly understand all the components in a steam system. Seagull has developed a CBT covering the auxiliary boiler plant, the control systems and safety precautions.
This course is designed to provide the tools to improve and develop seafarer safety behaviour and improve safety awareness. The key steps in developing seafarer safety (OAPE) are identified along with the vital role of behaviour based safety in developing a good safety culture.
This is an e-learning course for personnel working with design, selection and installation of cables and cable entries in junction boxes, enclosures and equipment in Ex areas.
As a crewmember in marine operations, have you ever thought about the factors that rob you of energy and endurance? This module offers you the opportunity to assess your individual endurance risk factors, find solutions to these challenges and generate ideas to create a Crew Endurance Plan.
One of the reasons why officers have problem giving feedback is that they don´t quite know what to say or how to say it. They find the situation awkward, particularly when they have to give critical feedback. As a result, problems are left unaddressed, and they often get even worse.
The unique engaging and challenging Dangerous Goods Trainer is aimed for initial and recurrent training of Flight Crew involved in transportation of Dangerous Goods by air and in particular by helicopter.
The unique engaging and challenging Dangerous Goods Trainer is aimed for initial and recurrent training of Load Handling Personnel involved in transportation of Dangerous Goods by air and in particular by helicopter.
The unique engaging and challenging Dangerous Goods Trainer is aimed for initial and recurrent training of Security Staff involved in transportation of Dangerous Goods by air and in particular by helicopter.
Assisting in training needs for the more hazardous tasks involved in Offshore operations this module has been developed in consultation with offshore experts and also mandatory legislation and guidelines.
Dropped objects awareness is focused on the prevention of accidents and safe behavior on drilling and production installations. This course is designed to increase the awareness of anyone working on a rig or any other oil and gas installation.
This course illustrates the serious health, job performance and legal implications of alcohol and drug abuse, with particular attention given to the hazards of substance abuse in the maritime workplace.
This is an e-learning course for personnel working with design, selection and installation of Exi equipment. The course will give you an overview of how the Exi concept is built, how the equipment is selected and what laws and regulations apply.
This is an e-learning course for personnel working with design, selection and installation of equipment used in Ex areas.
The module introduces the important safety aspects of working with and near electrical equipment on board ship.
This is a refresher e-learning course for personnel that already have some understanding of the general principles of explosion protection (typical: earlier Ex basic course). This course will provide a quick Ex basic repetition and update on changes made recently.
Vi tilbyr kurs i Ex grunnleggende som nettkurs. Kurset gir kandidaten en grunnleggende forståelse for prinsippene i elektriske anlegg i potensielt eksplosjonsfarlige områder. Hvorfor det er forskjellige soner og hva dette betyr. Krav til utstyr og plassering av dette.
This is an e-learning course for personnel organizing and/or performing inspection and maintenance on Ex equipment.
This course package is made for personnel who organize or perform: planning, installation, inspection and maintenance of Ex equipment. The courses give an introduction and repetition in different subjects treated in the IEC 60079 Standard (NEK EN 60079).
This course-series consists of 5 e-learning modules, that aims to give the candidate a fundamental understanding for the principles of intrinsically safe systems in different environments. The concept intrinsic safety is unlike the other Ex protection concepts, it is a system concept.
The course describes the primary causes of eye injuries on the job: proper selection, use and care of Personal Protective Equipment (PPE) that is available to help prevent damage to the eye: and the immediate first-aid treatment procedures for the most common types of eye injuries.
This course shows you how to secure yourself whilst working at hight. The advantages of various specific safety equipment is clearly visualized, and relevant regulations and regional differences are also covered.
FSE high and low voltage offshore covers all topics detailed in the FSE-regulation concerning work in and close by high and low voltage installations offshore.
FSE high voltage offshore covers all topics detailed in the FSE regulations concerning work in and by high voltage installations offshore. In addition we´ll go through safety philosophy, various injuries caused by electricity and correct treatment, and personal protective equipement.
FSE høy- og lavspenning offshore dekker kompetansekravene som stilles i FSE Forskriften. Kurset gir en fin innføring i relevant lovgivning og særregler som gjelder ved arbeid offshore. I tillegg behandles sikkerhetsfilosofi, skadetyper forårsaket av elektrisitet og behandling.
Kurset gir en innføring i relevant lovgivning og særregler som gjelder ved arbeid på høyspenningsanlegg offshore. I tillegg behandles sikkerhetsfilosofi, skadetyper forårsaket av elektrisitet samt behandling. Også riktig personlig verneutstyr behandles.
Kurset gir en fin innføring i relevant lovgivning og særregler som gjelder ved arbeid offshore. I tillegg behandles sikkerhetsfilosofi, skadetyper forårsaket av elektrisitet og behandling. Også valg av riktig personlig verneutstyr behandles.
FSE low voltage offshore covers all topics detailed in the FSE-regulation concerning work in and by high voltage installations offshore. In addition we´ll go through safety philosophy, various injuries caused by electricity and correct treatment, and personal protective equipment.
Food can carry disease and transfer it from one person to another as well as serve as a medium for growth of bacteria that may cause food poisoning. In MLC 2006 there are new requirements to the safe handling, preparation, and storage of food in ways that prevent foodborne diseases.
Guidelines for Offshore Marine Operations, and its objective is to provide guidance in the best practices which should be adopted to promote the safety on board all vessels servicing and supporting offshore facilities, and to reduce the risks associated with such operations.
The purpose of this training programme is to focus on the importance of proper greasing and maintenance of mooring winches and windlasses. The possible consequences of improper or infrequent greasing of mooring equipment are described together with tips for safe and efficient greasing procedures.
This CBT module will familiarize you with where H2S can be found and explore the properties and specific health and safety risks H2S poses. The CBT module will also introduce the methods used to measure H2S levels and identify safe and unsafe levels of exposure.
The offshore unit is a workplace that requires not only sufficient technical skills but also good cooperation and team work among the crew. There are many factors that destroy good cooperation, and one of these is the prevalence of harassment and bullying.
This is Seagull’s Advanced level module on the International Maritime Dangerous Goods Code, for seafarers with immediate responsibility for the loading, discharging and care in transit or handling of dangerous, hazardous or harmful packaged goods.
This training is designed to create awareness of hearing-loss hazards in the maritime workplace: to underscore the importance of taking adequate precautions to prevent hearing damage: and to provide practical knowledge about the proper selection, use and maintenance of hearing-protection equipment.
This module will provide crewmembers with a better understanding of orders and communication with others and will contribute to good human relationships on board a ship.
Accidents cost money: whether crew change and medical costs for personnel or clean up costs and fines for pollution. Chapter IX of SOLAS requires the safe management of ships through compliance with the ISM Code.
This training module is designed to train navigators in the practical use of the JRC ECDIS and satisfy the requirement for ‘Equipment Specific ECDIS Training’.
For personnel of various nationalities on board vessels, which do trade around the world, effective communication among themselves and between ship and shore is critically important.
This module gives a brief overview on the roles of the International Maritime Organization (IMO) and the International Labor Organization (ILO) with respect to maritime conventions.
Exercise benefits every part of the body, including the mind. The merits of regular physical activity ranges from preventing chronic health conditions to promoting weight loss and better sleep are widely acknowledged.
This is a basic training program in marine environment awareness for offshore personnel at management, operational as well as on support level.
This e-learning course will provide all necessary understanding and practical knowledge of how to operate the MARIS ECDIS900 system in a safe and efficient manner.
The main objective of this training programme is to educate the user as to how to provide medical care to sick and injured persons while they remain on board. Another objective is to enable the student to participate in coordinated schemes for medical assistance on board ships.
This training course prepare personnel on how to execute first aid in a safe and efficient manner. This course will focus primarily upon how first aid techniques work. It also provides valuable knowledge about how to evaluate and treat injured and sick persons.
Many people often feel that holding a meeting is a waste of time. They say so, because meetings sometimes create confusion rather than provide clarity. However, a well-organized meeting is an effective venue for discussions of crucial issues within an organization.
This module introduces the learner to experiential knowledge. It highlights the importance of mentoring, the role of a mentor and how experiential knowledge is passed on.
A modern marine electrical plant is a very complex system that demands trained personnel to ensure safe and economical operation. This CBT module will give understanding of basic principle of synchronous generators,and paralleling of generators, the main switchboard, and the power management system.
Permits To Work are integral safety systems that control and manage risks which arise during hazardous tasks on board. They ensure all personnel are mindful of their roles and responsibilities.
Choosing the best suited personal protective equipment is essential to be as safe as possible, when working in a hazardous environment. Personal protective equipment (PPE) come in many different qualities and designs for various hazards and conditions.
With Global warming, there has been an increased use of the Arctic region especially, by all elements of the maritime community: commercial, military, scientific and recreational. This has led to revised requirements for crew in STCW with amendments.
In an emergency situation the crewmembers must be familiar with the ships lifesaving equipment. They must be familiar with personal survival techniques and the equipment located in survival crafts.
Exercise benefits every part of the body, including the mind. This CBT module is intended to help seafarers improving their lifestyle while onboard. This is done by offering them pragmatic lifestyle advice and an easy to use physical training program appropriate to their onboard situation.
This training program is designed to assist the seafarer in preventing a piracy or armed robbery attack, managing a situation where pirates or armed robbers gain access to the vessel and understanding how to react if pirates do actually seize control of the ship.
This module prepares personnel to protect a vessel from pirate or armed robber attack, including the defence measures that can be taken on a vessel and sources of information to assist a crew.
This CBT module will provide a sound introduction to the principles of assessment for ships’ officers and shipping company staff involved in the assessment of seafarers’ knowledge and competence.
After completing this course you should be able to operate rotating equipment, evaluate the use of heat exchangers and explain the different types of valves and seals used in process installations.
You will learn to calculate energy conditions in process installations explain the design of piping systems and calculate the capacity and flow patterns in pipes.
After completing the course you should be able to operate equipment for adding chemicals to production wells, injection wells and process facilities on a platform or production ship.
When we speak, we often don’t give a complete description of the thoughts behind the words. If we attempt to completely describe our thoughts, we would never be able to finish talking. We inevitably shorten the description and mention only what we believe is the essence of our experiences.
Requirements for the recovery of persons from the water entered into force on 1 July, 2014, under SOLAS regulation III/17-1. This requires ship-specific plans and procedures for the recovery of persons from the water.
This training teaches the importance of using respiratory protection in workplaces where airborne toxins or irritants may occur.
The purpose of this training programme is to provide the users with knowledge and understanding of Risk Assessment and Risk Management. The idea is to heighten awareness of safety issues and get people to think and talk about job hazards and how they can be controlled.
The world changed on September 11th 2001. We all realised how vulnerable we are to attacks from terrorists. A ship can be used by terrorists, either to transport weapons or as a weapon itself.
Stress is a normal part of life. We experience stress as we adapt to changes in our environment. Stress can either help or hinder us from dealing with different circumstances, but this depends on how we react to it and manage it.
Maximizing the potential of multi-skilled crews can only happen if the leadership style within an organization follows an effective management philosophy and approach, which may be quite different from those applied 30 or 40 years ago.
This CBT covers working at height on an offshore vessel. It defines working at height and how to safely access high working places. The correct use of a waist belt safety harness and a full body safety harness, when attached to a fall restraint or a fall arrest system are described.
This training program begins with an overview of ergonomics – workplace design that is conducive to good health and effective job performance. In this context, the course instructs learners on how to assess risk of workplace injury and how to organize a workplace properly to minimize that risk.
Vi tilbyr arbeidsvarsling kurs 1 for bedrifter. Kravene til opplæring gjelder for alle som skal utføre arbeide på riks og fylkesveg, uavhengig av om dette er lønnet eller ikke, se definisjonen på vegarbeid.
Vi tilbyr arbeidsvarsling kurs 2 for bedrifter. Kravene til opplæring gjelder for alle som skal utføre arbeide på riks og fylkesveg, uavhengig av om dette er lønnet eller ikke, se definisjonen på vegarbeid.
Vi tilbyr fallsikringskurs for bedrifter. Hovedhensikten med fallsikringskurset er å gi den som skal arbeide i høyden kunnskap om sikker bruk, daglig kontroll og vedlikehold samt kasseringsregler for ulike typer fallsikringsutstyr.
Kurset vil gi personer som arbeider med verktøy og maskiner kunnskap om sikker bruk, daglig kontroll og vedlikehold. Du skal kunne bruke utstyret slik at uhell og ulykker unngås og du skal kunne legge forholdene til rette for en trygg og sikker arbeidsplass.